SUNSHINE POOL PRODUCTS

Click here to go to our new Website

 
 Ignore the information below as it is not up to date.

Click on the link above to go to our new website.











INDEX

Home Page

Email Us

POOL PRODUCTS
Pool Chlorine Generators

 Pool Ionizers

Pool Water Conditioners

SPA PRODUCTS
 Spa Bromine Generators

 Spa Ionizers

Spa Water Conditioners

OTHER PRODUCTS
Home Water Conditioners

Auto Water Conditioners

Sunshine

Pool Products

801-825-4523

FAX   801-825-5428
 
See address at bottom of page

SUNSHINE POOL PRODUCTS
Manufacturer of the Worlds Most Environmentally Friendly Pool & Spa Sanitizers
 
About Electronic Pool & Spa Sanitizers:  We recommend that every pool or spa have an ionizer which will reduce chemicals 80% to 90%.  For pools we recommend our Sunshine Ionizer model SPDS.  For spas use model SSDS, or Instant Ions model IONS-50 and a Copper Test kit model CTK.  Our PURITY combination salt chlorine generator and ionizer model P40I is the best system for complete sanitation of a pool, which only needs to maintain a very low .2 ppm of chlorine.  For a spa our PURITY model PBSL is the best system for complete sanitation, which only needs to maintain a very low .2 to .5 ppm of bromine.

Click Here to see our pool ionizer systems.  Click Here to see our spa ionizer systems.  Click Here to see our pool PURITY salt chlorine generator systems.  Click Here to see our spa PURITY salt bromine generator systems. 

About Sunshine Pool Products:  Sunshine Pool Products has been manufacturing electronic pool and spa sanitizers since 1991, making us one of the first and more experienced manufacturers. We manufacture the only combination salt chlorine generators and ionizer systems, which provide the best water quality, at the lowest costs, and lowest operating costs, than any other systems available anywhere.  Now we even have no cost to operate solar powered ionizers.

Please do not ask us questions about our products until you have read the entire page about the product.

POOL IONIZERS
For Natural Pool Water

If you're tired of swimming in chemicals, and would like to save 80% to 90% on the cost of chemicals, then this is the system for you.  Every pool should have an ionizer.  If you don't, you will always have algae problems, spend way to much on chemicals, and swim in harsh unpleasant chemicals.  Our Ionizers will save you hundreds of dollars every year and will give you the following benefits:
 
Low Initial Cost 
Superior Water quality 
No More Algae Problems
No More Red Itchy Eyes 
No More Dried Out Skin 
Simple to Operate 
Simple to Install
Sizes for Any Size Pool.
Pool Surface and Equipment will Last Longer
Lifetime Warranty on Most Models

HOW IT WORKS

Ionizers kill bacteria and algae in your pool.  The ionizer electrodes have a small DC voltage applied to them which forces ions to pass from one electrode to the other.  The ions are caught up in the water as they pass between the electrodes.  These ions attack and kill the bacteria and algae in your pool.  To maintain clean, clear water all you need to add is a sanitizer (chlorine or non chlorine) to your pool about once a week to shock and kill all the organics in your pool.   So, stop swimming in harsh expensive chemicals and enjoy the spring like water of an ionized pool with the Sunshine Ionizer.

What about a cartridge ionizer?
You should not use a cartridge ionizer that is installed inline or placed in the skimmer basket.  They are very expensive, have to be replaced every few months, and you have very little or no control on the amount of ionization being produced.  They are sold without a test kit so you never know what the ion level is and if it is safe to reduce the sanitizer level.  The best method of ionizing a pool and with the lowest cost over time is with an electronic ionizer.
 
About our Ionizers
Sunshine Pool Products has been manufacturing ionizers since 1991.  Our Sunshine Ionizer has large electrodes made of a copper and zinc alloy that last up to 10 times longer than other ionizers.  Our electrodes provide superior purification and water quality.  Only our ionizers come with Instant Ions for startup so your pool in instantly ionized, and so you don't have to wait weeks and use up your electrodes to build up the ion level.

Beware of copper only pool ionizers with small round electrodes, no Instant Ions, and a control box that looks like our Sunshine Ionizer as they are a cheap copy of our ionizers.  Smaller round electrodes do not weigh as much or last as long as our large half round electrodes.  Beware of  high percentage silver electrodes.  The silver content in ionizer electrodes should never contain high levels of silver as it is very toxic and causes staining of pool surfaces.

Beware of Eco Smarte systems as they do not do what they claim and are very expensive.
 

SUNSHINE IONIZER
Worlds Best Ionizers 
Feature Large Copper and Zinc Electrodes, Three Power Supply Choices, and Instant Ions for Instant Start-Up.


What is different about the Sunshine Ionizer?
The Sunshine Ionizer electrodes are made of a custom made copper, and zinc alloy designed for the best water treatment and which are two to ten times larger than other electrodes so they last longer, 3 to 5 years on most pools, and our replacement electrodes are a better value.  Check out our electrode weights and compare.  Many other ionizers use just copper which is not as effective as our copper and zinc electrodes.  Beware of copper only ionizers with electrodes and a control box that look like our Sunshine Ionizer as they are a cheap copy of our ionizers.  Beware of  high percentage silver electrodes.   High concentrations of silver are very toxic and causes staining of pool surfaces.  Our Sunshine Ionizer electrodes contain 85% copper and 15% zinc.

All  Pool Sunshine Ionizers come with a bottle of our Instant Ions to add to your pool at start-up so your pool is instantly ionized so you won't have to wait a few weeks for the ions to reach the proper level before your pool is ionized.  Other ionizers use up to 50% of the electrodes in just the first few weeks to bring the ion level to the proper level.  We have been manufacturing ionizers since 1991, making us one of the earlier and more experienced ionizer manufacturers.

Economy Model SPE Features

Simple Low Cost System.
Comes with a Copper Test Kit.
Comes with an 8 oz Bottle of our Instant Ions with enough Copper and Zinc Ions to treat 50,000 Gallons for Start-Up.
Power Supply has Adjustable Output, and Polarity Switch.  The power supply is for indoor use only unless used outdoors with a weather proof outlet cover installed over a weather proof outlet.  The outlet must be wired to the pump timer so it has power only when the pump is running.
Has Threaded Electrode Cell with a 2" Tee Fitting, and 1-1/2" Reducing Bushings if Needed. 
One Year Warranty.
30 Day Satisfaction Guaranty.


Model SPE Specifications:

INPUT VOLTAGE:  120 or 240 Volts AC
INPUT FREQUENCY:  50 TO 60 HERTZ
OUTPUT VOLTAGE:  3 to 12 VDC
OUTPUT CURRENT: .5 AMP. MAX
CONTROLLER:  NOT WEATHER PROOF
FLOW RATE:  20 TO 80 GPM
CELL:  2" PVC TEE
CELL REPLACEMENT:  2" THREADED FITTING
ELECTRODE SIZE AND TYPE:  1-1/2" HALF ROUND X 2-1/2" LONG - COPPER & ZINC
ELECTRODE WEIGHT: 1.5 LB
TYPICAL ELECTRODE LIFE:  3 TO 5 YEARS
CAPACITY:  UP TO 25,000 GALLONS

 Economy Pool Sunshine Ionizer
Model SPE

Treats up to 25,000 Gallons

Was $129  Our Wholsale Price for Everyone $89
ADD
Lower USA Shipping $20

Replacement Electrodes
Model SPSC
Was $99  Our Wholsale Price for Everyone $69
add
Lower USA Shipping $15

out






PI-E
Economy Pool Sunshine Ionizer

Model SPE

Treats up to 25,000 Gallons

Click here to view our instructions


Standard SPS Series Features

Three Power Supply Choices:  Model SPS is Internal, Model SPSL is External, or Model SPSS is Solar.
Comes with a Copper Test Kit.
Comes with an 8 oz Bottle of our Instant Ions with enough Copper and Zinc Ions to treat 50,000 Gallons for Start-Up.
Adjustable Output for Precise Metering of Ion Production.
IP66 Rated Weatherproof Control Box Protects Electronics from Moisture, Corrosion, and Harsh Environments. 
High Efficiency UL, CSA, and CE listed Auto Ranging (120 or 240 volt) Switching Power Supply.  Model SPSL power supply is for indoor use only unless used outdoors with a weather proof outlet cover installed over a weather proof outlet.  The outlet must be wired to the pump timer so it has power only when the pump is running.  Use model SPSL or SPSS where a listed ionizer is required, such as for public pools.  Model SPSS comes with a 5 Volt 5 Watt Solar Panel. 
Solid State Microprocessor Controlled Electronic Circuitry with Automatic Sequential Polarity Switching to keep Electrodes Clean and Even Wearing.
Light Emitting Diodes Display Power, Timing, Current, Low and High Current Warning, Cell Power, and Polarity.
Has Threaded Electrode Cell with a 2" Tee Fitting, Sealed Electrical Connections so there are No Corrosion Problems, and 1-1/2" Reducing Bushings if Needed. 
Comes with a UL, CSA, and CE listed power supply which provides 5 volts DC to the Controller.  Model SPSS comes with a 5 Watt Solar Panel.  Use model SPSL or SPSS where a listed ionizer is required, such as for public pools.
Lifetime Warranty.
30 Day Satisfaction Guaranty.


SPS Series Specifications

INPUT VOLTAGE:  Model SSDL 120 or 240 Volts AC Auto Ranging.
Model SSDS 5 Volts DC

INPUT FREQUENCY:  50 to 60 Hertz
OUTPUT VOLTAGE:  5 Volts DC
OUTPUT CURRENT:  2 Amps. Max
CONTROLLER:  Plastic Weather Proof
FLOW RATE:  10 To 120 GPM
CELL:  2" Tee with Extension and 2" Threaded Fitting
CELL REPLACEMENT:  2"
Threaded Male Fitting
ELECTRODE SIZE AND TYPE:  1-1/2" Half Round x 2-1/2" LONG - COPPER & ZINC
ELECTRODE WEIGHT: 1.5 LB
TYPICAL ELECTRODE LIFE:  3 To 5 Years
CAPACITY:  UP TO 25,000 Gallons


Standard Pool Sunshine Ionizer
Models SPS, SPSL, and SPSS
Treats up to 25,000 Gallons

  SPS Series Comparison

Model SPS:  Easy to install - The power supply is listed, but because it is installed in the controller which is not currently listed you should not use this model where you need a listed ionizer.  Best for use on existing residential pools.
Model SPS Was $249  Our Wholsale Price for Everyone $169
add
Lower USA Shipping $20

Model SPSL:  A little Harder to install - Has listed power supply so it can be used on any pool including public pools.  The control box is low voltage that does not need to be listed.
Model SPSL Was $249  Our Wholsale Price for Everyone $169
add
Lower USA Shipping $20

Model SPSS:  Easy to install - Has a low voltage DC Solar panel so it can be used on any pool including public pools.  The control box is low voltage that does not need to be listed.  The solar panel will last much longer than an electronic power supply and costs nothing to operate.  We recommend this model where you have a sunny south facing wall or roof near the pool equipment to install the solar panel.  Your pool circulation system should run all day while the sun is shinning with this model.
Model SPSS Was $249  Our Wholsale Price for Everyone $189
add
Lower USA Shipping $20

Replacement Electrodes
Model SPSC
Replaces old model PC-E for models PI-E and PI-S
Was $99 Our Wholsale Price for Everyone $69
add

Lower USA Shipping $15

out






SPS
Model SPS

Click here to view our instructions



SPSL
Model SPSL

Click here to view our instructions



SPS
Model SPSS

Click here to view our instructions



Deluxe SPD Series Features:

Three Power Supply Choices:  Model SPD is Internal, Model SPDL is External, or Model SPDS is Solar.
Comes with a Copper Test Kit.
Comes with an 8 oz Bottle of our Instant Ions with enough Copper and Zinc Ions to treat 50,000 Gallons for Start-Up.
Adjustable Output for Precise Metering of Ion Production.
IP66 Rated Weatherproof Controller Protects Electronics from Moisture, Corrosion, and Harsh Environments. 
High Efficiency Auto Ranging (120 or 240 volt) Switching Power Supply.  Model SPDL is for indoor use only unless used outdoors with a weather proof outlet cover installed over a weather proof outlet.  The outlet must be wired to the pump timer so it has power only when the pump is running.
Solid State Microprocessor Controlled Electronic Circuitry with Automatic Sequential Polarity Switching to keep Electrodes Clean and Even Wearing.
Light Emitting Diodes Display Power, Timing, Current, Low and High Current Warning, Cell Power, and Polarity. 
Electrode Cell has a 2" Tee Fitting with 1-1/2" Reducing Bushings If Needed, See Through Section for Viewing of Electrodes, and Hand Tightened Union for Easy Removal of Electrodes Without any Tools. The Electrodes are twice the size of our other Sunshine Ionizers, and have Sealed Electrical Connections so there are No Corrosion Problems. 
Comes with a UL, CSA, and CE listed power supply which provides 5 volts DC to the Controller.  Model SPDS comes with a 5 Watt Solar Panel.  Use model SPDL or SPDS where a listed ionizer is required, such as for public pools.
Lifetime Warranty.
30 Day Satisfaction Guaranty.


SPD Series Specifications:

INPUT VOLTAGE:  120 or 240 Volts AC Auto Ranging.
INPUT FREQUENCY:  50 TO 60 HERTZ
OUTPUT VOLTAGE:  5 VDC
OUTPUT CURRENT:  2 AMPS. MAX
CONTROLLER: PLASTIC WEATHER PROOF
FLOW RATE:  10 TO 120 GPM
CELL:  2" PVC TEE with SEE THROUGH EXTENSION
CELL REPLACEMENT:  HAND TIGHT UNION
ELECTRODE SIZE AND TYPE:  1-1/2" HALF ROUND X 6" LONG - COPPER & ZINC
ELECTRODE WEIGHT: 3 LB
TYPICAL ELECTRODE LIFE:  3 TO 5 YEARS
CAPACITY:  UP TO 50,000 GALLONS

 

Deluxe Pool Sunshine Ionizer
Models SPD, SPDL, and SPDS
Treats up to 50,000 Gallons
Worlds Best Ionizer and Best Value
Electrodes Weigh 3 lb.

Deluxe Pool Sunshine Ionizer
Models SPD2, SPDL2, and SPDS2
Treats up to 100,000 Gallons
Worlds Best Ionizer and Best Value
Comes with two Electrode Cells and two Quarts of Instant Ions
Total Electrode Weight 6 lb. 

 
SPS and SPD Series Comparison
The SPD series has electrodes that are twice as large making it the best value and the best value when replacing electrodes, a union to remove the electrodes with no tools, a see through cell to view the electrodes, and has microcontrollor electronics that provides more precise timing and displays more information such as timing, and current to the electrodes with low and high current warnings.  You always know your ionizer is working properly with the SPD series of ionizers.
 
SPD Series Comparisons

Model SPD:  Easy to install - The power supply is listed, but because it is installed in the controller which is not currently listed you should not use this model where you need a listed ionizer.  Best for use on existing residential pools.
Model SPD Was $299  Our Wholsale Price for Everyone $199
add
  Lower USA Shipping $20

Model SPD2 Was $499 Our Wholsale Price for Everyone $299
add
  Lower USA Shipping $25

Model SPDL:  A little Harder to install - Has listed power supply so it can be used on any pool including public pools.  The control box is low voltage that does not need to be listed.
Model SPDL Was $299  Our Wholsale Price for Everyone $199
add
  Lower USA Shipping $20

Model SPDL2 Was $499  Our Wholsale Price for Everyone $299
add
  Lower USA Shipping $25

Model SPDS:  Easy to install - Has a low voltage DC Solar panel so it can be used on any pool including public pools.  The control box is low voltage that does not need to be listed.  The solar panel will last much longer than an electronic power supply and costs nothing to operate.  We recommend this model where you have a sunny south facing wall or roof near the pool equipment to install the solar panel.  Your pool circulation system should run all day while the sun is shinning with this model.
Model SPDS Was $299  Our Wholsale Price for Everyone $219
add
  Lower USA Shipping $20

Model SPDS2 Was $499  Our Wholsale Price for Everyone $319
add
  Lower USA Shipping $25

Replacement Electrodes
Model SPDC
Replacement for old model PI-D

Was $139  Our Wholsale Price for Everyone $99
add
 Lower USA Shipping $18

out


 Click here to view our instructions

How are the Pool Ionizers Installed?

The  2" PVC cell is glued into the pool circulation system after the filter, and the controller is connected to the pump timer circuit so it has power only when the circulation pump is running.  Models with solar panels require a sunny south facing wall or roof near the pool equipment to mount the solar panel and the circulating pump to run during the day while the sun is out.

What Chemicals Will I Needed to Use With a Pool Sunshine Ionizer?

It is necessary to add an oxidizing agent (chlorine) periodically to help break down excess organic debris, suntan and body oils ext.  You can just add 3 ppm a liquid chlorine each week after you are done swimming for the day.  The liquid chlorine is not stabilized and is usually dissipated by the next day so you are swimming virtually chemical free.  You can use granular chlorine to shock your pool if you dissolve it in water first, but never use calcium hypo chlorite as it hardens the water and creates scale.  Alternatively, you can maintain a constant chlorine level at .2 ppm with chlorine tabs or a chlorine generator.  For bromine maintain .4 ppm.  It has been proven that maintaining .2 ppm chlorine and .2 ppm copper is more effective sanitation than using just chlorine at 2 ppm.  You must also maintain your pH between 7.2 and 7.6.

Is an Ionizer Compatible with a Salt Chlorine Generator?

Yes, all our ionizer, and salt chlorine generator systems are compatible with each other.  We recommend that every pool or spa have an ionizer.  Pools with any salt chlorine generator should also have an ionizer.

What about an Ozone Generator?

  A salt chlorine generator and ionizer costs much less and is much more reliable than an ozone generator and provides much better water quality.

Do you have larger Ionizers?

Yes, we have several models of commercial ionizers that will treat up to 1,000,000 gallons with just one ionizer, and even larger pools can be treated by using multiple ionizers.  These ionizers are often used for treatment of water for cooling towers, fountains, ponds, and industrial uses.  Call for pricing and information on our commercial ionizers.  See Specifications below.

Large Sunshine Ionizers

Our large ionizers have similar features as the SPD series above.
All come with enough Instant Ions to treat their capacity for start-up.


Model SPD4 Treats 200,000 Gallons has 4 cells or 2 double cells in a 4" theaded fitting.
Was $699  Our Wholsale Price for Everyone $499  Call to Order

Model SPD8 Treats 400,000 Gallons has 8 cells or 4 double cells in a 4" threaded fitting.
Was $1,299  Our Wholsale Price for Everyone  Call to Order

For larger capacities, order more than one system.

Models SPD4 and , SPD8 Specifications:

INPUT VOLTAGE: 
120/ 240 Volts AC Auto Ranging.
INPUT FREQUENCY:  50 TO 60 HERTZ.
OUTPUT VOLTAGE:  5 VDC.
OUTPUT CURRENT:  2 to 20 AMPS
CONTROLLER:  LARGE WEATHER PROOF
SINGLE CELL:  2" PVC TEE with SEE THROUGH EXTENSION
SINGLE CELL REPLACEMENT:  HAND TIGHT UNION
ELECTRODE SIZE AND TYPE:  1-1/2" HALF ROUND X 6" LONG - COPPER AND ZINC
DOUBLE CELL:  4"  PVC MALE TREAD
OPTIONAL DOUBLE CELL TEE:  4" TO 8" WITH EXTENSION ADAPTER
E
LECTRODE WEIGHT:  3 LB PER SINGLE CELL / 6 LB PER DOUBLE CELL
TYPICAL ELECTRODE LIFE:  3 TO 5 YEARS
CAPACITY:  UP TO 400,000 GALLONS


Sunshine Ionizer Cost Savings Chart
Includes Purchase Price, Replacement Electrodes, and Typical Chemical Costs.


Purchase Price
5 year Cost (4 month swim season)
5 Year Cost (12 month swim season)
SUNSHINE IONIZER Model SPDS
$199
$300
$749   With the electrode cell replaced once
Low Cost Ionizer
$99
$739    With the electrode cell replaced as needed $2,239   With the electrode cell replaced as needed
Cartridge Ionizer
$499
$1,274    With the cartridge replaced as needed
$2,824   With the cartridge replaced as needed
Chlorine Pool without an Ionizer
$0
$1,250
$3,800
Bacquacil or Similar Sanitizer $0
$2,900
$8,600

Comparison includes typical chlorine sanitation, pH balance, and maintenance chemical costs.  Does not include installation cost of ionizers.  Remember the ionizer also provides superior water quality which is priceless.

 

INSTANT IONS AND COPPER TEST KIT


IONS-25
IONS-50
IONS-50
CTK
IONS-50
Treats 50,000 Gallons
1/2 Pint Bottle of Instant Copper and Zinc Ions.
 New  Granular  Formula
Will provide a 2 to 3 year Ionization supply for spa treatment.  A copper test kit is required to test the copper level every 2 weeks to maintain a .3 ppm of copper in your spa.  You will need to add Instant Ions to your spa water as needed every 2 to 8 weeks.

Our Wholsale Price for Everyone $18
add
Lower USA Shipping $10

 
out  
IONS-100
Treats 100,000 Gallons
  Pint Bottle of Instant Copper and Zinc Ions.
 New  Granular  Formula
Will provide a 4 to 6 year Ionization supply for spa treatment.  A copper test kit is required to test the copper level every 2 weeks to maintain a .3 ppm of copper in your spa.  You will need to add Instant Ions to your spa water as needed every 2 to 8 weeks.

Our Wholsale Price for Everyone $32
add
 Lower USA Shipping $12  

out  
IONS-200
Treats 200,000 Gallons
  Quart Bottle of Instant Copper and Zinc Ions.
 New  Granular  Formula
Will provide a 8 to 12 year Ionization supply for spa treatment.  A copper test kit is required to test the copper level every 2 weeks to maintain a .3 ppm of copper in your spa.  You will need to add Instant Ions to your spa water as needed every 2 to 8 weeks.

Our Wholsale Price for Everyone $58
add
 Lower USA Shipping $18

out   
Copper Test Kit
Has 50 Test Strips
Tests Copper, pH and Total Alkalinity
Comes with all our Ionizers.

 
Our Wholsale Price for Everyone $10
add
 Lower USA Shipping $10

 
out


IONIZATION QUESTIONS AND ANSWERS

What is Ionization?    The electronic release of copper and zinc Ions.
What is an Ion?   Ions are positively charged atoms.
How does Ionization work?    A safe low voltage DC current is applied to the copper and zinc electrodes.  As the ions attempt to move from one electrode to the other, they become suspended in the water.
How does copper, silver, and zinc ionization purify water?   The copper and zinc ions disrupt the enzyme balance of bacteria and virus in your water.
Is ionization all that you need for your water?   It is necessary to add an oxidizing agent periodically to help break down excess organic debris, suntan and body oils ext.  Most of our customers just add a gallon of liquid bleach (Clorox) each week after they are done swimming for the day.  The bleach is not stabilized and is usually dissipated by the next day so you are swimming virtually chemical free.  Using a non chlorine oxidizer allows you to swim shortly after application so you never have to swim in chemicals again!
How is ionization safer than chemicals?   Most, if not all of the chemicals used to purify water are caustic and or toxic.  Many are now thought to be Carcinogenic.  Copper and zinc are safe for drinking water as well as swimming pool water in quantities much greater than necessary for purification.
How is ionization more pleasant than chemicals?    The need for high levels of chemicals is eliminated.  Also eliminated are the strong chemical odors, damaging effects on hair, skin, fabrics, liners and pumping equipment. Furthermore, you eliminate the need for frequent trips to the store to purchase heavy containers of chemicals. Chemical storage is no longer a problem.
What are the operational costs of ionization?    In most cases, the electrodes will last 3 to 5 years and are relatively inexpensive to replace.  The only other cost is the electrical consumption which is only a few dollars a year.
How often will I have to test the water?    You will need to test the ion level every few weeks and maintain proper water balance.  The ion system is pH neutral so it will not change your water balance like chemicals do.
What about bromine?  Bromine compounds are about 1/3 chlorine anyway.  There is no stabilizer for bromine so it is used up in about 2 hours in an outdoor pool.  Bromine is more expensive than chlorine and still burns the eyes and skin at levels above 1 ppm.  Bromine salt (Sodium Bromide) can be used with salt for improved efficiency.

Home Page

Pool Products   Pool Chlorine Generators     Pool Ionizers     Pool Water Conditioners

Spa Products    Spa Bromine Generators     Spa Ionizers     Spa Water Conditioners

Other Products     Home Water Conditioners     Auto Water Conditioners


    Click Here To Find The Truth About God, Jesus Christ, and Religion.    

    Sunshine Pool Products
Shipping and Physical Address:  Bldg. F7 Freeport Center
Clearfield, Utah 84016
Post Office Mailing Address:  391 E 1700 S PO Box 160094
Clearfield, Utah 84016

801-825-4523     FAX  801-825-5428

E-MAIL:   info@sunshinepool.com smile

This site is best viewed at 800 X 600 resolution or higher.

Copyright   Sunshine Pool Products, All Rights Reserved