SUNSHINE POOL PRODUCTS


Click here to go to our new Website

 
 Ignore the information below as it is not up to date.

Click on the link above to go to our new website.








 
INDEX

Home Page

Email Us

POOL PRODUCTS
Pool Chlorine Generators

 Pool Ionizers

Pool Water Conditioners

SPA PRODUCTS
 Spa Bromine Generators

 Spa Ionizers

Spa Water Conditioners

OTHER PRODUCTS
Home Water Conditioners

Auto Water Conditioners

Sunshine

Pool Products

801-825-4523

FAX   801-825-5428
 
See address at bottom of page
SUNSHINE POOL PRODUCTS
Manufacturer of the Worlds Most Environmentally Friendly Pool & Spa Sanitizers
 
About Electronic Pool & Spa Sanitizers:  We recommend that every pool or spa have an ionizer which will reduce chemicals 80% to 90%.  For pools we recommend our Sunshine Ionizer model SPDS.  For spas use model SSDS, or Instant Ions model IONS-50 and a Copper Test kit model CTK.  Our PURITY combination salt chlorine generator and ionizer model P40I is the best system for complete sanitation of a pool, which only needs to maintain a very low .2 ppm of chlorine.  For a spa our PURITY model PBSL is the best system for complete sanitation, which only needs to maintain a very low .2 to .5 ppm of bromine.

Click Here to see our pool ionizer systems.  Click Here to see our spa ionizer systems.  Click Here to see our pool PURITY salt chlorine generator systems.  Click Here to see our spa PURITY salt bromine generator systems. 

About Sunshine Pool Products:  Sunshine Pool Products has been manufacturing electronic pool and spa sanitizers since 1991, making us one of the first and more experienced manufacturers. We manufacture the only combination salt chlorine generators and ionizer systems, which provide the best water quality, at the lowest costs, and lowest operating costs, than any other systems available anywhere.  Now we even have no cost to operate solar powered ionizers.

Please do not ask us questions about our products until you have read the entire page about the product.

PURITY
Pool Salt Chlorine Generators and Ionizers
For Pure Natural Water

If you're tired of buying, hauling, and storing expensive chemicals to treat your pool then this is the system for you. Your pool was meant to be enjoyed.  Now you can relax and enjoy your pool.  PURITY will save you hundreds of dollars every year, and will give you the following benefits
 
Crystal clear water
Operates for just pennies a day
No toxic chemicals to handle
Softens your water
Reduces scale
Easy to install
Low cost
Easy to operate
Lifetime warranty.


Our
PURITY systems purify pool water from ordinary salt added to pool water through the process of electrolysis.  This process breaks the salt into its basic elements of sodium, and chlorine.  After the chlorine does its disinfecting work it converts back into salt and so the same salt is used over and over again.

Your pool naturally contains some salt, but you'll  need to add more salt to your pool to bring the salinity level to 3,000 ppm with PURITY.  The salinity of sea water is 12 times stronger, and a tear drop is 2.5 times stronger than the salinity you will be using in your pool.  With PURITY you will not be able to taste the salt in your water.  It is like swimming in soft silky mineral water.  This low salinity level will not harm your pool or filtration equipment.

PURITY is easily installed to new or existing pools.  The in-line generating cell is installed on the return side of the filter, and the power is wired to the pump timer circuit.  With our combination systems that include an ionizer, a very low .1 to .2 ppm of chlorine is all that is required to sanitize your pool, so you will not have the costs, smells, harmful effects, or problems associated with using traditional chlorine chemicals.  Other salt chlorine generators require 1 to 3 ppm of chlorine.  There is no better way to treat your pool water.  So stop buying, hauling, and storing expensive chemicals and enjoy swimming in crystal clear mineral water with PURITY.

Beware of expensive salt generators with electrodes made of a proprietary material as these are infringing on one of our patents using our old technology, and they are a poor investment.
Beware of Eco Smarte systems as they do not do what they claim and are very expensive.

PURITY
Salt Chlorine Generator and Ionizer
The Worlds Best Pool Sanitizer System

Model P40I
For Pools up to 40,000 Gallons
Includes model SPD Ionizer


NO LONGER AVAILABLE!
  
Click here to go to our new Website



Replacement PURITY Generator Cell For Model P40I or P40
Model P40C





P30RI

Model P40I



Start-up Requirements


PURITY requires 8 to 24 hours of operation daily.  You will  need 3,000 ppm of salt, and 60 to 80 ppm of stabilizer (Cyanuric acid) for proper operation.

Salt is available at most hardware, grocery, and pool stores.  Stabilizer is available at most pool retail stores.  After initial start-up, only a little Salt, and Stabilizer are added once or twice a year as pool water is replaced.  They all stay in the water and do not dissipate once added to the water.

Read all questions and answers below for more information

PURITY MODEL P40I FEATURES

sb Model P40I Comes with a Sunshine Ionizer Model SPD.  Includes a Copper Test Kit, and a Quart Bottle of Instant Ions.
sb Comes with a Salt Test Kit so You Can Easily Maintain the Proper Salt Level in Your Pool for Optimum Chlorine Output
sb IP66 and NEMA 4X Rated Weatherproof Aluminum Equipment Enclosure Protects Electronics from Heat, Moisture, Corrosion, and Harsh Environments.
sb High Efficiency, Switching Power Supply with Over Current, and Fuse Protection for Safe Low Cost Operation.
sb Safe and Efficient 5 Volt DC Operation.
sb Cleaning Cycle Keeps Electrodes Clean
sb  Automatic Over current Shutoff and Turn On with any Above Normal Output, Provides Cell and Controller Protection.
sb Adjustable Output for Precise Metering of Chlorine Production.
sb All Solid State Electronic Circuitry with Microprocessor Control Providing Precision Monitoring Every Few Seconds.
sb Indicator Lights Display Power, Cell Power and Polarity, Output Current, Low Output, High Output with Automatic Shut Off and Turn On.  You Always Know How it is Operating.
sb Electrode Cell with Durable Plated Titanium Electrodes with up to a 10 Year Life Expectancy.
sb Electrode Cell available with 1-1/2" or 2" unions, and Sealed Electrical Connections so there are No Corrosion Problems.
sb Meets or Exceeds UL and NSF Standards.
sb Lifetime Warranty.
sb 30 Day Satisfaction Guaranty.


MODELS P40I SPECIFICATIONS

INPUT VOLTAGE:  120 OR 240 VAC. 
INPUT CURRENT:  .33 AMPS @ 120 VOLTS. 
INPUT POWER:  50 WATTS 
INPUT FREQUENCY:  50 TO 60 HERTZ.
POWER SUPPLY:  HIGH EFFICIENCY SWITCHING
OUTPUT VOLTAGE:  5 VDC.
OUTPUT CURRENT:  8 AMPS
CONTROLLER:  ALUMINUM WEATHER PROOF  8.75" H x 5.75" W x 2.5" D
MINIMUM FLOW RATE:  20 GPM 
PRESSURE DROP:  NEGLIGIBLE  
ELECTRODE CELL:  2" PVC WITH 1-1/2" OR 2" UNIONS 
CELL LIFE EXPECTANCY:  UP TO 10 YEARS
IONIZER CELL LIFE EXPECTANCY:  3 TO 5 YEARS
MAXIMUM WATER TEMPERATURE:  95 F
CHLORINE PRODUCED:  8 GRAMS PER HOUR
MAXIMUM CAPACITY:  40,000 GALLONS


ADVANTAGES OVER OTHER CHLORINE GENERATORS

1.  Lower Cost
2.  Lower Cost to Operate

3.  Safer Lower Output Voltage
4.  Easier Plumbing & Electrical Installation
5.  Longer Lasting Power Supply and Electronics
6.  Indicator Lights Continually Display How it is Operating
7.  Lower Chlorine Level When Used with an Ionizer
8.  Eliminates Algae Problems
9.  Better Water Quality
10.  Best Warranty and Service

  PURITY Cost Savings Chart

Comparison includes typical chlorine sanitation, pH balance, and maintenance chemical costs.  Does not include installation cost of systems.  Remember the ionizer and chlorine generators also provide superior water quality which is priceless.

Frequently Asked Questions

 How do I determine what size system will treat my pool?

The capacities above are the maximum capacities for a residential pool with a typical residential bather load, with stabilizer added to pool water, and with the system operating 24 hours a day.  It is very important that you purchase a system that is large enough to properly sanitize your pool. Use our 24 hour circulating pump kit model PCPK below for energy efficient 24 hour operation.

What do I need to know about my pool when ordering?

You will need to know if your filter pump is connected to 120 or 240 volts, and if your filtration plumbing is 1 1/2" or 2".

How do I install PURITY to my pool?

You will need to install the cell fittings after the filter.  You will need to install the generating cell in place of a 90 degree elbow fitting with at least 3" of pipe on one side and 14" on the other side with no other fittings, and a 6" length of strait pipe to cut and install the ionizer tee fitting on models with an ionizer.  The AC power is connected to the pump timer output so that it only has power when the filter pump is running.  If you are using our 24 hour circulating pump, you connect both PURITY and the pump to the same circuit so they have power 24 hours a day.  Many of our customers install their system themselves.  Your local pool dealer can install it for you if you prefer.

How often will I have to clean the electrodes?

With PURITY your electrodes may never need to be cleaned.  If the electrodes should need cleaned, they are easy to clean. 

How do you clean the electrodes?

To clean; turn off the power to the pool pump and your controller.  Add 1 part hydrochloric (muriatic) acid to 5 parts water in a plastic container.  Remove the electrode cell.  Place the electrode cell in the solution for five minutes or until all scale is removed.  Rinse the cell by dipping it in container of clean water.  Replace the cell and hand tighten the unions.  Turn the pump and controller power back on.  Do not try to clean the electrodes with a brush or any other object.  If you use a container with a lid, such as a 5 gallon plastic container, you can store the cleaning solution and use it many times.

Can an ionizer be used with PURITY?

Model P40I comes with an ionizer to ionize pool water.  PURITY must be used with an ionizer to allow only a low .1 to .2 parts per million (ppm) chlorine level.  With the two systems working together algae problems will be a thing of the past because the ionizer eliminates algae.  By using both a Chlorine Generator and Ionizer system you get the benefits of both.  The Ionizer reduces the chlorine demand which increases the capacity of the generator, and improves the water quality even more because all you need to do is maintain a low .1 to .2 ppm chlorine level.  With this low level you won't even know the chlorine is there without testing for it.  Every pool should be ionized.  For more information on pool ionizers see our Pool Ionizers

Why do I need to add a Stabilizer (Cyanuric Acid)?

The liquid chlorine that is produced by PURITY is not stabilized so the sun will destroy the chlorine as fast as it is produced unless a stabilizer is added to the pool water.

 
PURITY
24 Hour Pool Circulating Pump Kit
Model PCPK


We recommend this kit for huge energy savings on all pools even without a PURITY system.  This kit will provide 24 hour sanitation and filtration increasing the capacity of any of the above PURITY systems, and while providing huge energy savings.  This kit is installed after the main circulating pump and before the filter.  By operating the pump 24 hours a day this pump will provide all or nearly all the filtration required at a much lower cost than running the main pump for just a few hours a day.

This kit is much lower in cost and much more efficient than purchasing a very expensive variable speed pump such as the Pantair Intelliflo pump.  For new pools or pool upgrading we recommend this kit, a 3/4 hp Pantair Wisperflo pump, and our model P40ID, which all together costs less than the Pantair Intelliflo pump by itself.  Do not purchase a larger pump as the 3/4 hp pump is all that is needed.  Just add a properly sized filter of your choice and you have the, most energy efficient sanitation and filtration system available anywhere.

This pump will pump about 60 GPM on a typical pool.  That is 3,600 gallons per hour and 86,400 gallons per day which is sufficient filtration for most pools.  You may need to run the main pump for 1 or 2 hours a day on some pools.  Both pumps can run simultaneously.

Model PCPK Includes a high quality 120 or 240 volt circulating pump with 2" unions, 2" spring loaded swing check valve, and 2 tee fittings.  You specify your pipe size when ordering.  All you need is some 1-1/2" or 2" PVC pipe, a few elbow fittings, and PVC glue and primer.  Never use any other type of check valve as it will not work properly.  This check valve is the only one that can be installed in any position and provide full flow through it when the main pump is running.


Model PCPK

Click here to go to our new Website






 

Picture of  Kit Coming Soon



SALT TEST KIT
Model STK

Easy to use.

Provides 10 Test Strips.

200 ppm resolution.

Included With All Our PURITY Pool Systems.

Click here to go to our new Website



For more information about Chlorine Generators Click Here.

Home Page

Pool Products   Pool Chlorine Generators     Pool Ionizers     Pool Water Conditioners

Spa Products    Spa Bromine Generators     Spa Ionizers     Spa Water Conditioners

Other Products     Home Water Conditioners     Auto Water Conditioners


    Click Here To Find The Truth About God, Jesus Christ, and Religion.    

    Sunshine Pool Products
Shipping and Physical Address:  Bldg. F7 Freeport Center
Clearfield, Utah 84016
Post Office Mailing Address:  391 E 1700 S PO Box 160094
Clearfield, Utah 84016

801-825-4523     FAX  801-825-5428

E-MAIL:   info@sunshinepool.com smile

This site is best viewed at 800 X 600 resolution or higher.

Copyright   Sunshine Pool Products, All Rights Reserved