POOL PRODUCTS SPA PRODUCTS Home Water Conditioners Auto Water Conditioners Sunshine Pool Products 801-825-4523 FAX 801-825-5428 See address at bottom of page
|
SUNSHINE POOL
PRODUCTS
Manufacturer of the Worlds Most Environmentally Friendly Pool & Spa Sanitizers About Electronic Pool & Spa Sanitizers: We recommend that every pool or spa have an ionizer which will reduce chemicals 80% to 90%. For pools we recommend our Sunshine Ionizer model SPDS. For spas use model SSDS, or Instant Ions model IONS-50 and a Copper Test kit model CTK. Our PURITY combination salt chlorine generator and ionizer model P40ID is the best system for complete sanitation of a pool, which only needs to maintain a very low .2 ppm of chlorine. For a spa our PURITY model PBSL is the best system for complete sanitation, which only needs to maintain a very low .2 to .5 ppm of bromine. Click Here to see our pool ionizer systems. Click Here to see our spa ionizer systems. Click Here to see our pool PURITY salt chlorine generator systems. Click Here to see our spa PURITY salt bromine generator systems. About Sunshine Pool Products: Sunshine Pool Products has been manufacturing electronic pool and spa sanitizers since 1991, making us one of the first and more experienced manufacturers. We manufacture the only combination salt chlorine generators and ionizer systems, which provide the best water quality, at the lowest costs, and lowest operating costs, than any other systems available anywhere. Now we even have no cost to operate solar powered ionizers. Please do not ask us questions about our products until you have read the entire page about the product. PURITY If
you're tired of buying, hauling, and storing expensive
chemicals to treat your spa then this is the system
for you. Your Spa was meant to be enjoyed.
Now you can relax and enjoy your Spa. There is
no better way to sanitize your Spa. PURITY will
save you money every month, and will give you the
following benefits:
|
Our PURITY system generates bromine from sodium bromide salt through the process of electrolysis. This process breaks the salt into its basic elements of sodium, and bromine. After the bromine does its disinfecting work it converts back into salt and is recycled back into bromine as it passes the electrodes, so the same salt is used over and over again.
A quart bottle of sodium bromide is added to treat your spa water which provides a very low salinity level of less than 1,000 ppm. This low salinity level will not harm your spa or filtration equipment. You will not taste the salt in the water. Once every 1 to 2 years your spa water will be drained and filled with fresh water and a bottle of sodium bromide added to your water. Our instant ions are added as needed to ionize the water so that the bromine level can be maintained at 1/10th the normal level providing the best water quality available. It is like relaxing in soft silky mineral water.
PURITY is easily installed to new or existing Spas. Your spa water must be drained and your spa rinsed and cleaned, and then filled with clean fresh water. The control box is attached to the cabinet, and the power supply is connected to the Spa equipment inside the cabinet. The drop in cell is placed in the spa water, or our in-line cell is installed to the 24 hour circulating pump on spas with have a 24 hour circulating pump, or you must add our 24 hour spa circulating pump kit model SCPK to use our inline cell.
There is no
better way to treat your Spa water. So stop buying,
hauling, and storing expensive chemicals and enjoy relaxing in
crystal clear water with PURITY.
Beware of expensive salt generators with
electrodes made of a proprietary material as these are
infringing on one of our patents using our old technology, and
are a poor investment.
Beware of Eco Smarte systems
as they do not do what they claim and are very expensive.
Bromine Generator with Ionization Model PBSL Sanitizes Spas up to 600 Gallons Comes with a Quart Bottle of Sodium
Bromide Salt. The Instant Ions and the copper
test kit shown in the picture are not included.
The Power Supply is Connected and Installed Inside the Spa Cabinet, and the Control Box is Installed On the Spa Cabinet. The cell is available as a drop in or an inline cell. The In-line Cell is installed to the 24 hour circulating pump with spas having a 24 Hour Circulating Pump, or must be used with Model SCPK our 24 Circulating Pump Kit Below. PURITY model PBSL requires 24 hour operation. Our 24 hour circulating pump kit is available below. Bromine Salt is available from us or our dealers. The salt stays in the water and does not dissipate once added to the water. With PURITY you can go a year or two without a water change. Replacement Cell Model PBSLC |
Picture does not show the In-Line cell. The sodium bromide is a quart bottle. The salt test kit, Instant ions, and the copper test kit pictured are not included. New picture coming soon. |
COMES
WITH A QUART BOTTLE OF SODIUM BROMIDE ELECTRODES THAT LAST UP TO 5 YEARS MICROPROCESSOR
CONTROLLED
ELECTRONICS CLEANING CYCLE THAT KEEPS THE ELECTRODES CLEAN INDICATOR
LIGHTS
TO MONITOR POWER, ADJUSTABLE OUTPUT CONTROL SAFE 5 VDC OUTPUT IN-LINE
CELL
AVAILABLE FOR SPAS WITH 24 HOUR CIRCULATING PUMPS LIFETIME WARRANTY 30 DAY SATISFACTION GUARANTEE |
INPUT VOLTAGE: 100 TO 250 VAC. AUTO SENSING INPUT FREQUENCY: 50 TO 60 HERTZ. OUTPUT VOLTAGE: 5 VDC OUTPUT CURRENT: .5 AMPS CONTROLLER: PLASTIC WEATHER PROOF CELL SIZE: 1 1/2" PVC IN-LINE CELL 1 1/2" WITH 3/4" BARB ADAPTERS CAPACITY: UP TO 600 GALLONS |
Why do you use bromine and not chlorine?
Can I use an ionizer or add Instant Ions to my spa water when using PURITY?
Can I use any sanitizers with
PURITY?
How often will I need to change my
spa water with PURITY?
Circulating Pump Kit Model SCPK Circulating Pump Only Model SCP PURITY model PBSL requires 24 hour
operation, so this Kit is required if your
spa does not have a 24 hour circulating
pump. The large 2 speed pump only
operates a few hours a day and will not work
to provide 24 hour operation.
Model SCPK Includes the circulating pump, 3 ft 3/4" ID Vinyl tubing, and four hose clamps. Connects to 3/4" ID ozone
or other jet water line and PURITY In-line Cell. PURITY Spa Circulating Pump Kit Model SCPK Click here to go to our new Website Spa Circulating Pump Model SCP |
The 2 white and 2 gray fittings pictured are no longer included in the kit. |
Pool Products Pool Chlorine Generators Pool Ionizers Pool Water Conditioners
Spa Products Spa Bromine Generators Spa Ionizers Spa Water Conditioners
Other Products
Home
Water Conditioners Auto Water
Conditioners
Click
Here
To Find The Truth About God, Jesus Christ, and
Religion.
Sunshine
Pool Products
Shipping and
Physical Address: Bldg. F7 Freeport Center
Clearfield, Utah 84016
Post Office Mailing Address: 391 E 1700 S PO
Box 160094
Clearfield, Utah 84016
801-825-4523
FAX 801-825-5428
E-MAIL:
info@sunshinepool.com
This site is best viewed at 800 X 600
resolution or higher.
Copyright © Sunshine Pool Products, All Rights Reserved